四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Morphology Control over the Organic Nanoparticles of 1,3-Diphenyl-5-（9-anthryl）-2-pyrazoline

The organic nanoparticles of a blue-light-emitting molecule, 1,3-diphenyl-5-(9-anthryl)-2-pyrazuline, were prepared by reprecipitation method using acetonitrile as the solvent for the molecular precursor. Three morphologies, spherical, doughnut-shaped and cubic, could be observed on the silicon substrate forthe nanoparfides by the volume-controlled addition of acetonitrile. The evolution of particle morphology as a function of acetonitrile addition was attributed to the variation of the growth habits of the particles in the different environment. The nanoparticles exhibit the novel photoluminescence spectra as compared to those of monomer and the bulk crystals.     

Study on the reaction of triple helix poly(A:2I) with Cu~(2+)

The effect of Cu2+ on the triple-stranded helical structure of poly(A:2I) was studied by means of circular dichroism spectral method with the help of ultraviolet spectral and ethidium bromide fluorescence probe methods. It was found that Cu2+ destabilizes the structure of the triple helix poly(A:2I) and induces its structural transformations, meanwhile, the transformations can be partially reversed by a higher NaCl concentration. The structural transformations may be expressed by the following scheme: poly(A:2I) - poly(A:I) + poly(I)- poly(A) + 2poly(I)     

聚合条件对N-羧基-L-丙氨酸-环内酸酐开环聚合产物分子量的影响

用光气法制备了N-羧基-L-丙氨酸-环内酸酐(L-Alanine NCA).系统研究了L-Alanine NCA开环聚合反应过程中引发剂、溶剂、温度对聚合物分子量的影响.用硝基苯作溶剂,三乙胺作引发剂,所得聚合物特性粘度[η]=1.18.实验中发现,L-Alanine NCA可以顺利地进行热聚合反应。反应具有速率快,转化率高,分子量大的特点。甲苯溶剂中反应5小时所得聚合物[η]=2.35,高于采用引发剂的聚合体系产物的相应值。     

Selective Determination of Nanogram γ-Globulin in Human Blood Serum by Resonance Light Scattering of Functionalized Nano-PbS

Functionalized nano-PbS has been prepared and characterized. The functionalized nanoparticles have good dispersibility in water. Reaction of functionalized nano-PbS with γ-globulin (γ-IgG) results an enhanced resonance light scattering (RLS) around 385nm.However, when the content of HSA is lower than 0.5μg/ml^-1 the RLS enhancement is very weak and is nonlinear to concentration of HSA. Based on these results, a new direct quantitative determination method for γ-globulin in blood serum samples without separation is established.Under optimal conditions, the enhanced RLS intensity is in proportion to the γ-IgG concentration in the range 10-500ng/mL. The limit of detection is 2.75ng/mL. This method is proved to be very sensitive, rapid, simple and selective for detection of γ-IgG in blood serum.     

几种树脂对西红花糖苷的吸附性能的研究

本文系统研究了硅胶和几种国产吸附树脂对西红花提取物溶液的吸附与洗脱性能，包括树脂的筛选，洗脱剂的选择，并研究了pH，温度和西红花提取物的浓度对西红花提取在SZ－1吸附树脂上的吸附影响，结果表明，SZ－1吸附树脂对西红花提取物的吸附能力较强，洗脱能力为最好，其吸附性能和洗脱性能均优于常用色谱固定相硅胶，SZ－1吸附树脂的静态吸附容量为1．04g/g，动态吸附容量为0．5－0．6g/g，洗脱率可达98％以上，且吸附速度快，易于洗脱和再生。     

炭气凝胶及其有机气凝胶前驱体的研究进展

介绍了炭气凝胶及其有机气凝胶前驱体的发展概况，着重总结了制备工艺条件(如催化剂及其浓度、反应物总浓度、反应物配比、溶剂、反应温度及时间、超临界干燥工艺条件和炭化工艺条件等)对有机气凝胶及其相应炭气凝胶中孔网络结构的影响，综述了中孔网络结构改性研究的进展．     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…